Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Rotobrush Dryer Vent Cleaning in Dallas: What to Know First
Rotobrush dryer vent cleaning in Dallas typically runs $150 to $340 for a whole-system cleaning, and most jobs are completed in 60 to 90 minutes on the first visit. We’re an independent Rotobrush service provider, which means we work on the machine and the vent system it cleans, not for the manufacturer. If you own a Rotobrush and need the vent line serviced, call (361) 309-3153 and we’ll give you a written price before any work starts.
This page is for Dallas homeowners who already own a Rotobrush system or are considering one, and want to know what keeping it running actually involves here. That means dealing with North Texas lint loads, long vent runs in older ranch-style houses, and the specific ways Rotobrush components wear. Marcus Veale and our crew have been servicing these systems in Dallas for years, and we’ll tell you straight what needs doing and what it costs.
How Rotobrush Products Fail – and How We Fix Them
- Rotobrush aiR+ and the pickup-head drive belt. The aiR+ line uses a flexible drive shaft with a small belt inside the pickup head. After a few seasons of Dallas attic heat, that belt glazes and slips, which means the brush spins slower than it should and lint gets packed into the vent instead of pulled out. We replace the belt with the OEM part and re-tension the head. The symptom is a vent that’s still coated with lint right after a cleaning pass.
- Rotobrush R5000 and HEPA cartridge clogging. The R5000 series is built for heavier commercial-style use, but the HEPA cartridge loads up fast with the fine clay dust that blows through Dallas neighborhoods. When the cartridge is saturated, the negative-pressure side of the machine drops off and lint gets left behind in the vent. We check differential pressure across the filter every visit, and swap in a fresh cartridge when it’s beyond cleaning. Most owners never think to check this.
- Rotobrush ebb and flow of the foam-ball wipe. Rotobrush machines use a foam ball run through the vent line as a final wipe. In Dallas, dryer vents that exit through the roof collect a dust-lint paste inside that hardens in the heat. One foam ball won’t pull it free. We run the ball twice, or switch to a whip head for the first pass, then the ball. You’d be surprised how many vents we see that still have a quarter-inch of caked lint after a single-pass cleaning.
- Rotobrush Viper and the quick-connect coupler. The Viper system’s quick-connect couplers are convenient, but they wear loose after repeated use, especially with the fine grit that blows around Dallas construction sites. A loose coupler lets the brush shaft wobble, which scuffs the inside of flex duct and can tear older foil ducting. We inspect the coupler on every call and replace it when it’s sloppy. It’s a $20 part that prevents a $400 duct replacement.
- Rotobrush variable-speed trigger on the brush motor. On the newer variable-speed models, the trigger assembly gets packed with lint dust from the very job it’s doing. The trigger starts to stick, the brush surges, and the operator loses control of brushing pressure. We blow out the trigger housing and re-lubricate the slide, or replace the trigger if it’s beyond saving. Some companies skip this step entirely.
Styles & brands we work with
Our Rotobrush Dryer Vent Cleaning Process
- 1
We confirm the setup. We ask what model machine you own, where the dryer is located, and where the vent exits. That tells us whether we’re pulling a brush through 8 feet of wall vent or 30 feet of roof run before we load the van.
- 2
We inspect the full vent run. Every job starts with a visual check at the dryer connection, the exterior termination, and any accessible mid-run points. In older Lake Highlands ranch houses, we regularly find vent runs that were spliced together decades ago and never cleaned properly.
- 3
We run the Rotobrush cleaning pass. Using our equipment matched to your duct size and material, we run the brush from inside the house toward the exterior, with negative-pressure extraction running the whole time. No shortcuts, no single pass and done.
- 4
We check the result with a camera. Before we button anything up, we run a scope through the vent so you can see what was removed. If the first pass missed something, we run it again. You shouldn’t have to trust a technician’s word that the vent is clean.
- 5
We reassemble and test. The dryer gets reconnected, run for a cycle, and we check airflow at the termination. We want to see proper velocity, not just “looks fine.”
- 6
We put the price in writing. Your total was agreed before we started. If we find something serious (a crushed pipe, a bird’s nest, a separated joint), we show you photos and give you a written price for the fix before any additional work. No surprise invoices.
See the difference
Before
After
Before
After
Before
AfterWhat Rotobrush Dryer Vent Cleaning Costs in Dallas
Here’s what we charge for the most common Rotobrush dryer vent cleaning scenarios in Dallas. These are whole-system prices, not per-vent pricing that inflates once the technician is in your hallway.
- Standard dryer vent cleaning, short run (under 10 feet): $150 to $190
- Longer vent run or roof termination (10 to 30 feet): $220 to $300
- Severe lint blockage, multiple passes, or bird nest removal: $300 to $340
- Vent cap replacement (standard cap, installed): $60 to $110
- Bird guard installation: $85 to $145
- Vent rerouting (short section, materials included): $200 to $400 depending on access
These are honest ranges. What moves the price is vent length, access difficulty, and how long it’s been since the last cleaning. For an exact quote before you commit, call (361) 309-3153. Estimates are free, and the price we quote is the price you pay.
Why Dallas Homeowners Call Linden Air Duct Dallas for Rotobrush Work
Most companies that offer dryer vent cleaning will work on any brand. We actually understand how Rotobrush machines behave in Dallas conditions, and we carry the wear parts that fail most often. We also service dryer vent systems paired with Lennox, Trane, and Carrier laundry setups, so if your dryer itself needs attention, we can tell you whether it’s a vent issue or an appliance issue before you call an appliance tech.
Every technician who walks through your door is background-checked, identity-verified, and shows a photo ID badge at the door. You get the tech’s name and photo before the visit, so you know who you’re opening the door to. The Threshold Standard isn’t a marketing phrase; it’s the specific verification we run on every employee. And every job carries a written price before work starts and our 365-Day Done Right Promise. If the work isn’t right, we make it right, in writing, for a full year.
FAQs
No. Rotobrush warranties the machine you bought, not the vent cleaning service done with it. When we clean your vent, we back our work with the 365-Day Done Right Promise: if the vent clogs again or the cleaning wasn’t complete, we come back and redo it at no charge within a year. That’s our warranty, not Rotobrush’s.
We keep the most common Rotobrush wear parts on the van: drive belts, quick-connect couplers, HEPA cartridges, foam balls, and trigger assemblies. If your machine needs something beyond our stock, most parts ship to Dallas in two to three business days. We’ll tell you on the spot whether it’s a same-day fix or a parts-order job. Call (361) 309-3153 for a free estimate on any Rotobrush repair.
We run a scope through the vent after every cleaning and show you the before and after. If the video shows lint still packed in the line, we run another pass right then. You don’t pay extra for the redo. If you’re not home during the cleaning, we’ll send the video to your phone. That’s the standard we hold: if Marcus Veale wouldn’t leave it in his own system, we’re not leaving it in yours.
If you already own the machine and the vent is short and straight, you can do a basic cleaning yourself. But most Dallas homes have vent runs longer than 10 feet, multiple bends, or roof terminations that make a proper cleaning harder than running a brush through. What we solve is the full inspection: checking the entire run for crushed sections, separated joints, and the roof or wall cap condition. Those are the things that cause dryer fires, and they’re easy to miss with a DIY pass.
Once every 12 months for most Dallas households. If you have a long roof run, do laundry for more than four people, or have pets, every 6 to 9 months is smarter. The dry Dallas climate means lint stays loose and moves easily, but the heat hardens what’s left behind into a crust that builds up faster than people expect. Call (361) 309-3153 and we’ll give you an honest schedule based on your vent, not a generic calendar reminder.
Ready to get your dryer vent cleaned right? Call Linden Air Duct Dallas at (361) 309-3153 for a free estimate. We’ll give you a written price before any work begins, send the tech’s name and photo before the visit, and back the whole job with the 365-Day Done Right Promise. Serving Dallas and nearby areas with Rotobrush dryer vent cleaning since 2004.
Written by Marcus Veale, Owner, Linden Air Duct Dallas at Linden Air Duct Dallas, serving Dallas and nearby areas.